我是一個標題。要更新我，請轉到數據管理器。
我是一段。我通過數據集連接到您的收藏。單擊預覽以查看我的內容。要更新我，請轉到數據管理器。
我是一個標題。要更新我，請轉到數據管理器。
我是一段。我通過數據集連接到您的收藏。單擊預覽以查看我的內容。要更新我，請轉到數據管理器。
我是一個標題。要更新我，請轉到數據管理器。
我是一段。我通過數據集連接到您的收藏。單擊預覽以查看我的內容。要更新我，請轉到數據管理器。
我是一個標題。要更新我，請轉到數據管理器。
我是一段。我通過數據集連接到您的收藏。單擊預覽以查看我的內容。要更新我，請轉到數據管理器。
我是一個標題。要更新我，請轉到數據管理器。
我是一段。我通過數據集連接到您的收藏。單擊預覽以查看我的內容。要更新我，請轉到數據管理器。
我是一個標題。要更新我，請轉到數據管理器。
我是一段。我通過數據集連接到您的收藏。單擊預覽以查看我的內容。要更新我，請轉到數據管理器。
万通塑料
Solution on PC, PC/ABS Surface Cracking
- Root problem solve
Enhance the productivity
Effective control and monitoring
焦点
背景
The surface cracking of PC or PC/ABS is commonly found on injection molded parts, especially cracked after painting. Our customer was producing shifter panel by PC.
挑战
While it’s appeared cracks after painting, and some cracks appeared around 1 month after assembly, so the whole lots of products were written off, thus affected the productivity, cost and cannot meet the delivery schedule.
问题
Our Technical Specialist checked the sample and injection process. After checking we noticed:
1. The dryer settings were not included and red flag was showed
2. The injection pressures were too high and almost exceed the recommended range
3. Lack of control and monitoring of barrel temps, screw cushion and pressures
结果
1. Increase customer mold temperature and injection processing temperature to improve PC material running performance
2. Reduce product stress
3. Suggest an effective to control and monitor the overall process
4. Cracking problem was solved